Aluminum window CNC profile bending machine
The formation of Windows has been revealed
Machines sent to Senegal

How are window frames made

Some of you who have read our previous articles have joined us to learn how Windows are made. This week we take a closer look at how window frames are made for aluminum doors and Windows.
First, we will find the aluminum profile manufacturer to customize the profile we need. The profile needs us to determine the size according to the Windows and doors we want. After the profile is determined, it is the production of the frame.
We need to determine the size of the required frame and cut the profile according to the demand. This is what we often refer to as a double-end cutting saw, but it's also possible to use a single-end cutting saw on a budget. Double-end cutting saws are more convenient. Place the material on the machine, press the start button and cut out the desired length and Angle. In general, double-headed saws can cut 45 degrees. After cutting enough of the required ingredients, we can proceed to the next step.

Double head cutting saw machine

Single head cutting saw machine

We need to prepare other materials, some need to prepare corner code, some need to prepare screws and so on. The Angle code used here can be cut with an Angle code saw. Set the width of the Shouting, fix it and then you can cut it. Our corner code saws are automatic feeders, so it is safer to have a shield.

Corner brace machine

When the corner code is ready, we need to assemble the corner code and profile. PVC window frame is used in the way of welding, aluminum profile is used in the way of splicing. With the corner code card in the profile, fixed, here is the use of the corner machine. There will be no problems such as loose, fixed will be very strong. When you have all four sides together, you basically end up with a border.

Corner crimping machine

Before the assembly, generally will use copying milling, water tank milling, keyhole slot machine and other machines, in the profile of the appropriate position on the milling out of the appropriate hole slot, used to install the door lock or reserved water tank. This step is usually done before Angle formation. In this way after the Angle can be a finished window frame.
After the above steps, this is the simplest aluminum door and window frame processing line, but, in practice, this production line also needs to use the end milling machine, and punch these two machines. I won't go into details here.

Ending milling machine

Punching machine

That's all for this week. Want to know more? Click the link below to find out everything you need to know.